Packet Tracer Switching Final

Switching Practice Final – Packet Tracer

I created a Packet Tracer activity for a CCNA Switching class final. I hope this Packet Tracer final exercise will help prepare you for your VLAN and Switching final, as well as any cumulative lab simulation involving switching and VLANs. The packet tracer involves VLANs, VTP, STP, Inter-VLAN routing, port security and wireless. The instructions for the lab final are included in the Packet Tracer file. You can download it here: CCNA3-dansFinal.zip

Note: This lab was created for the older CCNA 4.0 Switching curriculum which at the time was part of the CCNA3 course. The switching content material is now part of the CCNA2 course

Cisco IOS Commands

You need to know the following commands for my Packet Tracer Switching Practice Final (see below). The commands below use sample data only, you will need to fill in your own specific names and numbers based on the requirements of the lab.

switch# show running-config
switch# show vlan
switch# show vtp status
switch# show spanning-tree
switch# configure terminal
switch(config)# line console 0
switch(config-line)# password cisco
switch(config-line)# login
switch(config)# line vty 0 15
switch(config-line)# password cisco
switch(config-line)# login
switch(config)# enable secret class
switch(config)# vlan 5
switch(config-vlan)# name danscourses-vlan
switch(config)# vtp mode server
switch(config)# vtp mode client
switch(config)# vtp domain dansvtpdomain
switch(config)# vtp password danspass
switch(config)# spanning-tree vlan 1-1005 priority 4096
switch(config)# int vlan 99
switch(config-if)# ip address 192.168.99.2 255.255.255.0
switch(config)# ip default-gateway 192.168.99.1
switch(config)# int range fa0/1-3
switch(config-if-range)# switchport mode trunk
switch(config-if-range)# switchport trunk allowed vlan 1-50
{loadposition adposition6}switch(config-if-range)# switchport trunk native vlan 22
switch(config)# int fa0/10
switch(config-if)# switchport mode access
switch(config-if)# switchport access vlan 10
switch(config-if)# switchport port-security
switch(config-if)# switchport port-security maximum 3
switch(config-if)# switchport port-security violation shutdown
switch(config-if)# switchport port-security mac-address sticky
switch# copy run start

router# show running-config
router# show ip route
router# configure terminal
router(config)# line console 0
router(config-line)# password cisco
router(config-line)# login
router(config)# line vty 0 4
router(config-line)# password cisco
router(config-line)# login
router(config)# enable secret class
router(config)# int fa0/0
router(config-if)# no shutdown
router(config)# int fa0/0.5
router(config-subif)# encapsulation dot1q 5
router(config-subif)# ip address 192.168.5.1 255.255.255.0
router(config)# int fa0/0.44
router(config-subif)# encapsulation dot1q 44 native
router(config-subif)# ip address 192.168.44.1 255.255.255.0
router# copy run start

VLANs & Voice PT Lab

Video Tutorials

In the following videos, I build off of previous Packet Tracer video tutorials (see VLANs & Trunking PT Lab) and add a trunk to a router, DHCP services, and a voice VLAN for VOIP phones. The tutorials should be easy to follow along with, if you have a current version of Packet Tracer, 5.3.2 or higher.

In this part, I configure a trunk to a router, subinterfaces, 802.1Q encapsulation, and a Voice VLAN

In this part, I configure DHCP services on the router, telephony services, and VOIP phones